HackingHowto

From GNU MediaGoblin Wiki
Revision as of 17:23, 18 March 2016 by Cwebber (talk | contribs) (Add back git clone url)
Jump to navigation Jump to search

Hacking HOWTO

So you want to hack on GNU MediaGoblin?

First thing to do is check out the web site where we list all the project infrastructure including:

  • the IRC channel
  • the mailing list
  • the issue tracker

Additionally, we have information on how to get involved, who to talk to, what needs to be worked on, and other things besides!

Second thing to do is take a look at codebase chapter where we've started documenting how GNU MediaGoblin is built and how to add new things. If you're planning on contributing in python, you should be aware of PEP-8, the official Python style guide, which we follow.

Third you'll need to get the requirements.

Fourth, you'll need to build a development environment. We use an in-package checkout of virtualenv. This isn't the convenional way to install virtualenv (normally you don't install virtualenv inside the package itself) but we've found that it's significantly easier for newcomers who aren't already familiar with virtualenv. If you *are* already familiar with virtualenv, feel free to just install mediagoblin in your own virtualenv setup... the necessary adjustments should be obvious.

Getting requirements

First, you need to have the following installed before you can build an environment for hacking on GNU MediaGoblin:

GNU/Linux

Debian and derivatives

If you're running Debian GNU/Linux or a Debian-derived distribution such as Debian, Mint, or Ubuntu 10.10+, running the following should install these requirements:

sudo apt-get install git-core python python-dev python-lxml python-imaging python-virtualenv python-gst-1.0 libjpeg8-dev autoconf nodejs npm nodejs-legacy

Debian GNU/Linux jessie

sudo apt-get install -y git-core python python-dev python-lxml python-imaging python-virtualenv libjpeg-dev autoconf nodejs npm nodejs-legacy python-gst-1.0 gstreamer1.0-plugins-base gstreamer1.0-plugins-bad gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly gstreamer1.0-libav python-numpy python-scipy libsndfile1-dev libasound2-dev libgstreamer-plugins-base1.0-dev

Fedora / RedHat(?)

On Fedora:

yum install python-paste-deploy python-paste-script git-core python python-devel python-lxml python-imaging python-virtualenv gstreamer-python nodejs

openSUSE

This instructions might be incomplete. Try on openSUSE 13.2 or 13.1:

zypper install python-devel python-gstreamer-0_10 git-core python python-lxml python-Pillow python-virtualenv npm

ArchLinux / Parabola

The following command should work (not tested on a new ArchLinux / Parabola install. tested, it works):

pacman -S git python2 python2-lxml python2-pillow python2-virtualenv gstreamer0.10-python

Mac OS X

Mac OS X Lion

Download the Newest Python.

Git is already installed.

  • Note for PIL and lxml, you can: pip install pil lxml

Python-lxml: http://muffinresearch.co.uk/archives/2009/03/05/install-lxml-on-osx/ with sudo

Python Imaging Library (PIL): http://code.google.com/appengine/docs/python/images/installingPIL.html#mac

Libjpeg & Libpng: http://ethan.tira-thompson.com/Mac_OS_X_Ports.html Combo Installer

Mac OS X Snow Leopard

  1. You will probably want to install MacPorts this will give you access to many free software packages in the same manner to apt-get and yum: https://www.macports.org/install.php
  2. Ensure you install Git and the command line tools: https://help.github.com/articles/set-up-git#platform-mac
  3. Once both of those are installed type this in your terminal and enter your password when prompted for it sudo port install python27 py27-lxml py27-sqlalchemy py27-pil py27-virtualenv py27-gst-python py27-pastescript

Microsoft Windows

Thanks wctype!

Getting requirements

You can help:

If you have instructions for other GNU/Linux distributions, Windows, or Mac OS X to set up requirements, let us know!

How to set up and maintain an environment for hacking with virtualenv

Requirements

No additional requirements.


Create a development environment

After installing the requirements, follow these steps:

  • Clone the repository: git clone git://git.savannah.gnu.org/mediagoblin.git
  • Make the environment: ./bootstrap.sh && ./configure && make
  • Init the database:
 ./bin/gmg dbupdate

That's it!

If you want to make sure things are working, consider running the test suite: 

 ./bin/pip install scikits.audiolab && ./runtests.sh

(If you have troubles in the remaining steps, consider try installing virtualenv with one of the flags --setuptools, --distribute or possibly --no-site-packages. Additionally, if your system has python3.X as the default, you might need to do virtualenv --python=python2.7 or --python=python2.6)

If you have problems, please let us know!

Updating an existing environment

Updating for dependency changes

While hacking on GNU MediaGoblin over time, you'll eventually have to update your development environment because the dependencies have changed.

To do that, run:

./bin/python setup.py develop --upgrade && ./bin/gmg dbupdate


Updating for code changes

git pull -u git submodule update


NOTE: MediaGoblin used to be hosted on gitorious.org, but that is moving to read-only mode, so we're now on Savannah. If you have an old checkout, please update it by running the following:

git remote set-url origin git://git.savannah.gnu.org/mediagoblin.git

Running the server

If you want to get things running quickly and without hassle, just run:

./lazyserver.sh


This will start up a python server where you can begin playing with mediagoblin, listening on 127.0.0.1:6543. It will also run celery in "always eager" mode so you don't have to start a separate process for it.

By default, the instance is not sending out confirmation mails. Instead they are redirected to the standard output (the console) of lazyserver.sh.

You can change this behavior setting email_debug_mode to false in mediagoblin.ini


This is fine in development, but if you want to actually run celery separately for testing (or deployment purposes), you'll want to run the server independently:

./bin/paster serve paste.ini --reload


Running celeryd

If you aren't using ./lazyserver.sh or otherwise aren't running celery in always eager mode, you'll need to do this if you want your media to process and actually show up. It's probably a good idea in development to have the web server (above) running in one terminal and celeryd in another window.

Run:

CELERY_CONFIG_MODULE=mediagoblin.init.celery.from_celery ./bin/celeryd


Running the test suite

Run:

./runtests.sh


Running a shell

If you want a shell with your database pre-setup and an instantiated application ready and at your fingertips....

Run:

./bin/gmg shell


Troubleshooting

Wiping your user data

You can completely wipe all data from the instance by doing:

rm -rf mediagoblin.db kombu.db celery.db user_dev; ./bin/gmg dbupdate

Note:

Unless you're doing development and working on and testing creating a new instance, you will probably never have to do this.

Quickstart for Django programmers

We're not using Django, but the codebase is very Django-like in its structure.

  • routing.py is like urls.py in Django
  • models.py has SQLAlchemy ORM definitions
  • views.py is where the views go

We're using SQLAlchemy, which is semi-similar to the Django ORM, but not really because you can get a lot more fine-grained. The SQLAlchemy ORM tutorial is a great place to start.


YouCanHelp

If there are other things that you think would help orient someone new to GNU MediaGoblin but coming from Django, let us know!

Showing off your work with PageKite

If you're doing development with MediaGoblin, it's sometimes helpful to show off your work to gather feedback from other contributors. A number of the MediaGoblin developers use something called PageKite, which is a fellow free software web service which makes temporarily showing off work on your machine easy. There's a tutorial on how to use PageKite and MediaGoblin together available on the PageKite wiki.

If you are doing a lot of MediaGoblin development, the PageKite people have graciously offered us a good amount of bandwidth at no cost in an effort to help out fellow free software projects. If you've been making significant contributions, PM Chris Webber on freenode (who is paroneayea there) and ask if you can be added to our group plan.

Bite-sized bugs to start with

Now you should visit our latest list of bite-sized issues because squishing bugs is messy fun. If you're interested in other things to work on, or need help getting started on a bug, let us know on the mailing list or on the IRC channel.

Retrieved from "https://wiki.mediagoblin.org/index.php?title=HackingHowto&oldid=1827"